(Updated on January 3, 2014)
Welcome to the homepage of the Cadence Users Group at the University of Houston. This page contains information about the Cadence® design tools used in the Electrical and Computer Engineering Department at the University of Houston.
(Download the file and then take hardcopy.)
- Getting started in Cadence
- Inverter Layout
- Analog Layout
- Analog Analysis
- Using Instances
- Cif to Cadence
- C5 Models
- Linux in Lab to Cadence
- Adding 40 Pin Pads
ECE 5346/6346 VLSI Design
Professor W. Wosik Cr. 3. (3-0). Prerequisites ECE 3456 or ECE 3457 or equivalent
Fundamentals of integrated circuit design using computer-aided-design methods; MOS and bipolar techniques; standard cell, digital subcircuit and memory layout and design. Project: Design and have fabricated a functional integrated circuit.
ECE 7349 Advanced Topics in Microelectronics
Professor J. Chen Cr. 3. (3-0). Prerequisites ECE 5346 or ECE6346 or equivalent
Current research issues in the design, fabrication, testing and reliability of integrated circuits. Submicron design of CMOS digital and analog circuits.
ECE 5356/6328 CMOS Analog Integrated Circuits
Professor J. Chen Cr. 3. (3-0). Prerequisite: ECE 3456. Analysis and design of CMOS analog integrated circuits at the transistor level, single-stage and multistage amplifiers, differential pairs, current source biasing circuits, current mirrors, and operational amplifier circuit design.
Note: All three courses have Blackboard access.
"Information is provided 'as is' without warranty or guarantee of any kind. No statement is made and no attempt has been made to examine the information, either with respect to operability, origin, authorship, or otherwise. Any attempt to use this information is at your own risk."
Cadence® is a trademark of Cadence Design Systems, Inc., 555 River Oaks Parkway, San Jose, CA 95134